Precautions for repairing oil and gas lubrication equipment
Release time:
2021-11-09
Oil air lubrication, also known as "gas-liquid two-phase fluid cooling lubrication technology" in academia, is a new type of lubrication technology that has unparalleled advantages compared to traditional single-phase fluid lubrication technology. It successfully solves the problems that cannot be overcome by dry oil lubrication and oil mist lubrication. It is a magnificent flower in the blooming lubrication technology.
The oil and gas lubrication equipment is equipped with a complete data monitoring device, and the operating data is clear at a glance, making it easy for daily maintenance. But good oil and gas lubrication equipment also requires good maintenance and upkeep. Regular maintenance of oil and gas lubrication cannot be ignored.
The maintenance of oil and gas lubrication equipment is simple and only needs to be carried out during major repairs. So, what should be noted during the maintenance of oil and gas lubrication equipment? Let's take a look together.
1. Check if all lubrication points have sufficient oil. If there is no oil or very little gas, it is necessary to check the inlet and outlet of the front pipeline and distributor in a timely manner.
2. Check all pipelines, joints, and distributor inlets for oil leakage and seepage. If timely handling is required, when the main oil pipeline needs to be treated after pressure relief, the pipeline should be kept clean and free of impurities during this process.
3. Check the cleanliness of the filter elements of all filter devices. The pump inlet mainly has an oil suction filter, the main station has a high-pressure filter, the air source uses an air filter, and the satellite station has a brass filter.
4. Check all line connectors in the main station and satellite station for looseness and virtual connections.
TOUBO
Next:
Next:
Latest information
Things to know about the oil station
2025-09-29
Thin oil dispersed lubrication: There are two types of thin oil dispersed lubrication: manual lubrication and fully automatic lubrication. Manual lubrication is generally only used for small parts that are not frequently moved
Thin oil lubrication uses mineral oil as a lubricant. Thin oil has characteristics such as fluidity, adhesion to metal surfaces, certain viscosity and heat capacity, and stable lubrication performance. It also has a certain anti-corrosion effect. However, thin oil is not easy to seal, and the lubrication surface of equipment is prone to impurities such as water and iron oxide scale.
The types of rubber flexible vibration damping soft joint products should be assembled according to the assembly instructions during installation, otherwise product damage and other common problems may occur. To avoid the occurrence of the above-mentioned situation, please strictly follow the installation and use manual for the operation process. Rubber shock-absorbing soft joints have good comprehensiveness and can be used to connect valve fittings, vibrating pipelines, and pipelines with frequent changes in temperature. Rubber flexible vibration damping soft joint assembly is commonly found in the fields of sea surface, water, cold and hot water, drinking water, domestic sewage, light fuel oil, lubricating grease, wholesale of finished oil, steam, natural gas, steam and fine particulate matter powder. The series circular vibrating screen motor is connected to the exciter using a flexible coupling. The exciter can be disassembled and replaced as a whole. The bearings are lubricated with thin oil, and lubricating oil can be added once during operation, making maintenance and upkeep convenient.
Oil air lubrication is a new type of lubrication method that mixes thin oil with compressed air or nitrogen to form an oil air flow, which is transported to the friction lubrication point through pipelines in the form of fine oil droplets. The methods of continuous and intermittent gas supply can meet the continuous and stable lubrication needs of continuous casting equipment.
Automation control system: monitoring and data acquisition system, process automation control system, factory automation control system, hybrid control system, electrical transmission and motion control system, instrument system
TOUBO HYDRAULIC
CONTACT US
Address: No. 9 Fuhai Road, Tongzhou Bay Demonstration Zone, Nantong City, Jiangsu Province
Tel: +86-18116238989
Tel: +86-21-57545298
Tel: +86-17768683440
Email: info@nttoubo.com
Copyright © Toubo Hydraulic Technology (Nantong) Co., Ltd. All Right Reserved Powered by www.300.cn SEO Business license