What are the characteristics of the series of pipeline accessories for thin oil lubrication stations?

The types of rubber flexible vibration damping soft joint products should be assembled according to the assembly instructions during installation, otherwise product damage and other common problems may occur. To avoid the occurrence of the above-mentioned situation, please strictly follow the installation and use manual for the operation process. Rubber shock-absorbing soft joints have good comprehensiveness and can be used to connect valve fittings, vibrating pipelines, and pipelines with frequent changes in temperature. Rubber flexible vibration damping soft joint assembly is commonly found in the fields of sea surface, water, cold and hot water, drinking water, domestic sewage, light fuel oil, lubricating grease, wholesale of finished oil, steam, natural gas, steam and fine particulate matter powder. The series circular vibrating screen motor is connected to the exciter using a flexible coupling. The exciter can be disassembled and replaced as a whole. The bearings are lubricated with thin oil, and lubricating oil can be added once during operation, making maintenance and upkeep convenient.

How to choose a cost-effective thin oil lubrication station series?

The responsiveness of series lubricants enables them to quickly respond to various engine needs. Under extreme working conditions such as high load and high speed, the IFG series lubricating oil can quickly provide stable lubrication performance to ensure engine operation. Environmental protection and energy conservation have become the main themes of the global automotive industry, and low viscosity engine oil has gradually become the focus of the market. Series lubricants, with their excellent performance and engine protection, break the traditional rules of oil use and bring consumers a more environmentally friendly driving experience. The five outstanding protective advantages of series lubricants make them unique in the industry. These five protection technologies integrate the wisdom of lubricant experts, providing unique advantages in fluidity, adaptability, smoothness, responsiveness, and durability. These advantages enable the series of lubricants to protect the engine in various driving environments. With its philosophy, the series of lubricants are deeply loved by consumers. Moreover, its cleaning performance exceeds the GF-6 standard, effectively reducing the formation of sludge and keeping the engine clean. The series of lubricating oils have received widespread praise from users for their excellent performance and protective effects. Many users have provided feedback that the use of IFG series lubricants has significantly improved engine performance, optimized fuel economy, and resulted in smoother and quieter engine operation. In short, the series of lubricating oils, with their concept and five excellent protection advantages, bring outstanding performance to the engine. This makes the series of lubricants highly respected among Japanese car owners. As a global supplier of transportation fuels and lubricants, Chuguang will continue to innovate in the field of lubricants, providing customers with more environmentally friendly and sustainable products and services. In the future, Chuguang will work hand in hand with the automotive industry to contribute to achieving smarter transportation. (3) Comparison between the two: The usage range of engine oil and lubricating oil is different. In theory, engine oil is a type of lubricating oil, and a single lubricating oil may not necessarily be engine oil. Butter is also a lubricant, but not engine oil. Lubricating oil can reduce friction between automotive mechanical equipment after use. Engine oil is a common name for engine lubricating oil, which can also be said to be one of the many series of lubricating oils, just like the relationship between motor vehicles and cars. To meet the challenge of low viscosity engine oil, Idemitsu has adopted high-quality base oil and advanced additive technology to create an IFG series lubricating oil with excellent performance. Continuous optimization during the research and development process not only meets the needs of existing engines, but also conducts in-depth research and application on the development trends of future engine technologies.

Teach you how to choose a cost-effective light oil station?

The devices that provide services for the above devices can be included in the main service targets. Such as low-voltage power distribution panels, central oil stations, operation consoles (panels, boxes), etc. Inspection system. On site inspection personnel, staff, management personnel, etc. should inspect and register each part according to the system. The inspection frequency is low and not implemented according to the system Punish according to relevant regulations; The steel rolling mill will add a record book at the lubrication station, and personnel will check and register their entry and exit. Strengthen equipment management and monitoring: Regularly inspect and monitor equipment to promptly detect any abnormal situations. For serious problems, repair or replace components immediately to ensure the normal operation of the lubrication station. While completing various tasks, I also have the following shortcomings: firstly, sometimes I lack confidence and make low-level mistakes; Secondly, sometimes appearing impatient when dealing with certain matters; Thirdly, I am not familiar enough with some business skills, especially the operation of larger equipment such as oil stations and chemical pumps. Inspection system. On site inspection personnel, staff, management personnel, etc. should inspect and register each part according to the system. The frequency of inspections is low, and those who do not follow the system will be punished according to relevant regulations; The steel rolling mill will add a record book at the lubrication station, and personnel will check and register their entry and exit. According to the geological and construction schedule arrangement in the bidding documents, the anti-corrosion of the steel structure on the top floor of the Qianlong is determined. The single cycle excavation footage for Class III surrounding rock is, with a duration of approximately per cycle. After calculation, the footage for each cycle per day is approximately, and the monthly footage is approximately; The expansion excavation of Class IV surrounding rock section has a single cycle footage of m, with a duration of approximately per cycle. The footage is taken per cycle per day, with a monthly footage of 58m. The cycle times for each process are shown in the table below. Align the anti-corrosion alignment motor of the iron tower with the reducer, and tighten the motor with bolts after alignment. After the motor has finished idling, tighten the wheel bolts and wheel covers. External of the lubrication station, internal of the connecting oil pipe, and inspection of the connection flanges, plugs, and other positions of the oil station itself must be well sealed. Conduct a water pressure test on the cooler of the oil station, and clean the residue inside the cooler after the water pressure test. Lift the thin oil station in place using a track crane, align the equipment, and fix it to the ground with expansion bolts. Each dust removal system is equipped with an instrument detection control cabinet, which is installed in the electromagnetic station and consistent with the low-voltage cabinet. The cabinet is equipped with paperless recorders, manual operators, vibration measuring secondary meters, etc. The protection signals of the motor and fan are all connected to the paperless recorder, which communicates with the upper computer (including shaft vibration, shaft temperature, stator temperature, current, fan speed, oil temperature, cooling water inlet pressure signals, etc.). When using forced lubrication with thin oil, various signals of the oil station should be analog signals, with PLC trip and on-site low oil pressure direct trip (passive point). The oil pump should have master-slave exchange and mutual backup functions. Jump and operation signals enter the production system display.