Thin oil lubrication uses mineral oil as a lubricant. Thin oil has characteristics such as fluidity, adhesion to metal surfaces, certain viscosity and heat capacity, and stable lubrication performance. It also has a certain anti-corrosion effect. However, thin oil is not easy to seal, and the lubrication surface of equipment is prone to impurities such as water and iron oxide scale.

Whether using thin oil forced spray lubrication or grease lubrication, the performance of the oil has a significant impact on the lubrication effect. So, it is necessary to strictly select lubricating oil according to the specifications and grades provided by the manufacturer to ensure the good performance of the main bearings.

Intelligent control of thin oil lubrication: using thin oil lubrication and equipped with an air cooling system, controlled by PLC and intelligent instruments, it can achieve fully automatic lubrication control, and the lubrication temperature can be adjusted to provide more ideal conditions for bearings.

Changing from thin oil to oil and gas can save a lot of lubricating oil, because the fuel consumption of oil and gas lubrication is less than the amount of leakage when using thin oil lubrication. After the transformation of the Huashun oil air lubrication system, which originally used lubricating oil, the fuel consumption was only 3 barrels per month. Moreover, the transformation avoided the pollution of the environment and cooling water caused by the leakage of lubricating oil, which not only protected the environment but also saved water treatment costs.

The mechanical maintenance section should establish equipment lubrication files in a systematic manner, recording the time, location, refueling amount, refueling personnel, and lubricant brand for each refueling (or refilling) and oil change.

Thin oil dispersed lubrication: There are two types of thin oil dispersed lubrication: manual lubrication and fully automatic lubrication. Manual lubrication is generally only used for small parts that are not frequently moved, and it is not easy to connect to the parts provided by centralized lubrication stations, nor is it easy to repair. Parts, such as from points to camshafts and roller bearings. Thin oil dispersed fully automatic lubrication is generally used in industrial equipment, including oil pool lubrication and welding smoke lubrication. The enclosed transmission gear is lubricated with engine oil sump, which is easy to maintain and has a very good lubrication effect. The welding smoke lubrication of the cylinder is a unique structural requirement.

Direct use of solid powder lubricants. Fix the powder onto the friction surface using methods such as wiping or mechanical pressure; Mix the powder with volatile solvent and spray it onto the friction surface; Transporting powder onto the friction surface with gas during mechanical operation; Mix powder and lubricating oil into an oil agent, and then apply it to the friction surface; Or lubricate like dry oil or thin oil, such as graphite oil, oil, grease, aluminum disulfide paste, etc.

Centralized lubrication of thin oil: In most cases, centralized lubrication of thin oil is lubrication of pressure circulation systems. Generally, lubrication stations (such as car fuel tanks, pumps, valves, etc.) are located around the bottom of the press or in pits, and gear oil pumps are used to lubricate according to the pressure regulating valve. Oil is sent to every lubrication point.

The Light Out IFG series lubricating oil is a well-known fully synthetic engine oil, which is currently the mainstream engine oil in the market with good quality and performance. The advantages of fully synthetic engine oil are very obvious. For example, starting a vehicle in colder weather can easily ignite smoothly, and the replacement cycle is long, almost 1.5 times longer than the replacement time of ordinary lubricating oil. At the same time, the multifunctional replacement of fully synthetic engine oil extends the life of the engine, further reduces the failure rate of the engine, and its cleaning ability also reduces the wear and tear of the engine. The light emitting IFG series lubricating oil adopts other APISP standards and has good antioxidant, anti-wear, and viscosity stability. It is an SP grade oil that car owners can choose from, which is more conducive to protecting the engine and the car.

Disclaimer: The content is forwarded from the Internet, and this website does not own the ownership nor bear the relevant legal responsibility. If you find any content on this website that is suspected of plagiarism, please go to Contact Us to report it and provide relevant evidence. Once verified, this website will immediately delete the suspected infringing content.

TOUBO